💟Contributing
Looking to submit a PR? Thank you!
First, if you're not yet familiar on how to contribute to open source, you might want to watch this short viedo.
First thing you want to do is fork the keycloakify and the keycloakify-starter repos.
Here is how you can setup a development environment. You must use Yarn classic (v1). First you want to clone keycloakify and the keycloakify starter alongside each other
cd ~/github
git clone https://github.com/<your github username>/keycloakify
git clone https://github.com/<your github username>/keycloakify-starter
You can start the storybook locally in dev mode with:
cd ~/github/keycloakify
yarn
yarn storybook
If you want to test the changes you've made in keycloakify in the starter simply run
cd ~/github/keycloakify
yarn link-in-starter
In parallel you can:
cd ~/github/keycloakify-starter
yarn storybook
# or
npx keycloakify start-keycloak
And see the changes you make on the keycloakify project applied in the starter, it's all hot reloaded.
Last updated
Was this helpful?